PRODUCT PROPERTIES:
- Ready-to-use, no mixing required.
- Easy and fast application.
- High flexibility and good crack bridging.
- Resistant to UV and weathering.
- Good solar reflectance and reduces heat absorption.
- Open to moisture vapor transmission.
- Over paintable.
- Resistant to dirt, stains, and easy to clean.
AREAS OF APPLICATION:
- External walls and facades.
- Concrete roof slabs and gutters.
- Exterior areas with occasional foot traffic (build-up system).
- Tole roofs,…
APPLICATION NOTES:
1. Substrate preparation:
- The substrate must be structurally sound and free from cement laitance, loose particles, dust, oil, grease and any other contaminants or old coatings which may affect the adhesion.
- Grind smooth all high spots and sharp protrusions.
- Surface defects such as voids, blowholes and static cracks must be repaired and refilled to prepare a sound surface for bonding.
- Horizontal substrates must have sufficient slope gradient to avoid water ponding.
- Metal surfaces must be rust-free and clean.
2. Mixing: MC-Proof 950 is a ready-to-use product, no mixing required. However, after opening the container, the product must be thoroughly stirred until completely homogeneous before application. It is recommended to use a low speed mechanical stirrer.
3. Application: MC-Proof 950 can be applied with brush, roller or airless spraying equipment. MC-Proof 950 should be applied with at least 2 coats crosswise and the waiting time for dry-touching of the coat is around 2-4 hours, depending on the ambient conditions and the thickness of the coat. At extreme areas such as corners, wall and floor conjunctions, or build-up systems, MC-Fast Tape or an appropriate glass fiber mesh should be immediately embedded into the first fresh coat.
4. Precautious: Don’t apply MC-Proof 950 under rain or extreme weather. It should not be used in permanent contact with water. Roofing structures need to be designed at least 2% slope gradient. Ambient conditions and surface temperature must be under 35°C during the application.
5. Protection and curing: Full cure of MC-Proof 950 waterproofing system is approximate 14 days after the final coat. However, water tightness tests may be carried out after 7 days. The freshly applied membranes must be protected from rain for a minimum of 6-12 hours.
6. Safety instruction: Please take notice of the safety information and advice given on the packaging labels and safety data sheets.
