MC-TechniFlow 1301

• PRODUCT DESCRIPTION:

MC-TechniFlow 1301 plasticize concrete mix, improve workability. Increased setting time and slump retention, easier placing.

• PRODUCT PROPERTIES:

• High water reduction ability.
• Improve good slump retention.
• Increase high early and ultimate strength of concrete.
• Reduce shrinkage and creep.
• Free of corrosive components.

• AREAS OF APPLICATION:

• Pumping concrete or high slump concrete.
• Massive concrete.
• Long transport distances.
• Prolonged concrete pouring time.
• High temperature environment.

APPLICATION NOTES:

• MC-TechniFlow 1301 plasticize concrete mix, improve workability.
• Increased setting time and slump retention, easier placing.
• Increased compressive strength and flexual strength, increased waterproofing and shrinkage.
• It can be mixed directly into measured water before adding to dry concrete mix or added to wet mixed concrete, should be mixed for at least 1 minute.
• Trial mixes are recommended to establish exact dosage rates required to suit individual requirements. When accidental overdosing occurs, the set retarding effect increases. However, the final strength will not be affected if this period has right curring.
• We can provide accurate dispensing equipment upon request.
• Use an appropriate mixer and do not mix by hand. If assistance is required, please contact our Technical Service Department.
• Can be combined with all MC-BIFI products but must be mixed separately.
• Can be used with all standard cement types as well as sulfate resistant cement.
• Does not contain any hazardous substances. It is safe to use with standard precautions followed in the construction industry, such as use of hand gloves, safety goggles, etc.
• Avoid contact with foodstuffs and utensils. Avoid prolonged skin contact. In case of contamination, it should be thoroughly rinsed with water. When splashed into eyes or mouth, wash thoroughly with clean water and obtain medical attention immediately.

PRODUCT CHARACTERISTICS: