- PRODUCT PROPERTIES:
➢ Copolymer dispersion.
➢ Water-based, transparent when dried.
➢ Film-forming.
➢ Substrate solidification.
➢ Open to water vapour diffusion, hydrophobic.
➢ Resistant to UV, weathering and alkali.
➢ Application by roller, brush and airless spraying.
➢ Certified in accordance with EN 1504 part 2.
- AREAS OF APPLICATION:
➢ Primer for mineral substrates.
➢ Suitable for use on alkaline and neutral substrates.
➢ Also suitable for use on old coatings.
➢ REACH-assessed exposure scenarios: periodical water-contact, periodical inhalation, application.
➢ Certified in accordance with EN 1504 part 2 for principle 1, procedure 1.2.
- PRODUCT CHARACTERISTICS:
| Packaging | 10L container |
| Storage | Can be stored in cool and dry conditions for at least 12 months in original unopened packs. Protect from frost. |
| EU Regulation 2004/42 (Decopaint Directive) | RL2004/42/EG All/j (40 g/l) ≤ 40 g/l VOC. |
| Packaging disposal | Make sure single-use containers are completely empty. |
- APPLICATION NOTES:
➢ Substrate preparation: All substrates to be primed must be sound, clean and free from all loose particles, dust, oil and any other contaminants. The surface pull-off strength of the substrate must comply with relevant technical regulations.
➢ Application:
– MC-Color Primer is ready-to-use and must be stirred thoroughly prior to application. Application is carried out continuously and streak-free using a roller, a brush or by airless spraying technique.
– Application must not proceed during rain, high humidity, frost or risk of frost. Freshly applied layers must be protected from dew, rain and frost.
– Overcoating time: See “Technical Data” table.
– Rain-proof: See “Technical Data” table.
➢ General information: Coverage rates depend on condition of the substrate which may lead to over- or under-consumption. The recommended values in the “Technical Data” table are to be observed. MC-Color Primer must not be used during rain or temperatures below + 5°C. MC-Color Primer is a primer and only used in combination with the surface protection systems MC-Color Flair pure, MC-Color Flair pro, MC-Color Flex pure, MC-Color Flex pro and MC-Color Flex vision.
