PRODUCT PROPERTIES:
- Excellent water reduction ability.
- Slump retention and flowability very good at low slump and makes lightweight porous concrete easy to construct.
- Increase setting time ability, high early and ultimate strength.
- Promote faster early strength development and reduce curing time for concrete.
- Free of corrosive components.
AREAS OF APPLICATION:
- Self-compacting concrete, high flow concrete.
- Pre-cast concrete, prestressed concrete requires high early strength.
- Spun pile concrete.
- High grade concrete, durable concrete.
- Thin structure, dense steel.
- Prestressed beam, floor.
- Complicated detail requires high strength.
PRODUCT CHARACTERISTICS:
| Standard | Complies with ASTM C494 & TCVN 8826 Type F |
| Consistency | Liquid |
| Expiry | 8 months |
| Form of delivery | 200 L drums
1000 L IBC tanks Tank trucks |
TECHNICAL DATA:
| Characteristic | Unit | Value | Comments |
| Density | g/cm³ | 1.08 ± 0.05 | |
| Recommended dosage | Litre | 0.6 – 1.6 | per 100 kg of binder |
| Typical dosage | Litre | 0.6 – 1.2 | per 100 kg of binder |
| Max. Chloride content | % | per weight < 0.1 |
APPLICATION NOTES:
- MC-PowerFlow 3858 is a new generation of concrete admixture based on modified polymer technology with superior high range water reducing to enhance the early and ultimate strength.
- Strong dispersant effect on cement particles, increase workability and slump retention.
- Can be mixed directly into measured water before adding to dry concrete mix or added to wet mixed concrete, should be mixed for at least 1 minute.
- Trial mixes are recommended to establish exact dosage rates required to suit individual requirements. Significant overdosage will result in increased setting time of the concrete. However, provided concrete is cured effectively, ultimate strength and properties will not be affected.
- We can provide accurate dispensing equipment upon request.
- Use an appropriate mixer and do not mix by hand. If assistance is required, please contact our Technical Service Department.
- Can be combined with all MC-BIFI products but must be mixed separately.
- Can be used with all standard cement types as well as sulfate resistant cement.
- Does not contain any hazardous substances. It is safe to use with standard precautions followed in the construction industry, such as use of hand gloves, safety goggles, etc.
- Avoid contact with foodstuffs and utensils. Avoid prolonged skin contact. In case of contamination, it should be thoroughly rinsed with water. When splashed into eyes or mouth, wash thoroughly with clean water and obtain medical attention immediately.
