PRODUCT PROPERTIES:
- High water reduction ability.
- Good slump retention.
- Good control slump loss but not affect to early strength and ultimate strength.
- Improve construction surface, increase waterproofing ability.
- Free of corrosive components.
AREAS OF APPLICATION:
- Bored-pile concrete, diaphragm wall,… good slump retention for long time placing.
- Concrete in hot weather conditions.
- Massive concrete, pumping concrete.
- Long transport distances, requiring to maintain good slump retention for difficult placing conditions.
- Slender components with congested reinforcement.
APPLICATION NOTES:
- MC-PowerFlow 2266 is a new generation of a superplasticizer based on modified polymer polycacboxylate ether with high water reduction causing highly workability with low water content.
- Allows production of high quality concrete, concrete requiring long lasting slump retention.
- Good slump retention for long transport distances.
- Can be mixed directly into measured water before adding to dry concrete mix or added to wet mixed concrete, should be mixed for at least 1 minute.
- Trial mixes are recommended to establish exact dosage rates required to suit individual requirements. When accidental overdosing occurs, the set retarding effect increases. However, the final strength will not be affected if this period has right curring.
- We can provide accurate dispensing equipment upon request.
- Use an appropriate mixer and do not mix by hand. If assistance is required, please contact our Technical Service Department.
- Can be combined with all MC-BIFI products but must be mixed separately.
- Can be used with all standard cement types as well as sulfate resistant cement.
- Does not contain any hazardous substances. It is safe to use with standard precautions followed in the construction industry, such as use of hand gloves, safety goggles, etc.
- Avoid contact with foodstuffs and utensils. Avoid prolonged skin contact. In case of contamination, it should be thoroughly rinsed with water. When splashed into eyes or mouth, wash thoroughly with clean water and obtain medical attention immediately.
PRODUCT CHARACTERISTICS:
| Standard | Complies with ASTM C494 & TCVN 8826 Type G |
| Consistency | Liquid |
| Expiry | 8 months |
| Form of delivery | 200 L drums; 1000 L IBC tanks; Tank trucks |


