- PRODUCT DESCRIPTION:
➢ MC-PowerFlow 2135 is a high-range water-reducing superplasticizer formulated with specially engineered polycarboxylate ether (PCE) polymers, providing excellent water reduction capability to produce highly flowable concrete with a low water content.
➢ High consistent, reduce risk of segregation at high slump, improve pumping concrete quality.
➢ Increase compressive strength and flexual strength, reduce permeability.
- PRODUCT PROPERTIES:
➢ High water reduction ability.
➢ Improve slump retention and significantly improve workability.
➢ Increase high early and ultimate strength of concrete.
➢ Improve construction surface, increase waterproofing ability.
➢ Free of corrosive components.
- AREAS OF APPLICATION:
➢ Massive concrete and concrete with long setting time requirement.
➢ Pumping concrete or high slump concrete.
➢ Bored – pile concrete.
➢ Long transport distances.
➢ High ambient temperature.
➢ Slender camponnents with cangested reinforcement.
➢ Structure concrete: Foundation, column, wall, slab,…
- APPLICATION NOTES:
➢ Can be mixed directly into measured water before adding to dry concrete mix or added to wet mixed concrete, should be mixed for at least 1 minute.
➢ Trial mixes are recommended to establish exact dosage rates required to suit individual requirements. When accidental overdosing occurs, the set retarding effect increases. However, the final strength will not be affected if this period has right curring.
➢ We can provide accurate dispensing equipment upon request.
➢ Use an appropriate mixer and do not mix by hand. If assistance is required, please contact our Technical Service Department.
➢ Can be combined with all MC-BIFI products but must be mixed separately.
➢ Can be used with all standard cement types as well as sulfate resistant cement.
➢ Does not contain any hazardous substances. It is safe to use with standard precautions followed in the construction industry, such as use of hand gloves, safety goggles, etc.
➢ Avoid contact with foodstuffs and utensils. Avoid prolonged skin contact. In case of contamination, it should be thoroughly rinsed with water. When splashed into eyes or mouth, wash thoroughly with clean water and obtain medical attention immediately.
- PRODUCT CHARACTERISTICS:
| Standard | Complies with ASTM C494 & TCVN 8826 Type G |
| Consistency | Liquid |
| Expiry | 8 months |
| Form of delivery | 200 L drums; 1000 L IBC tanks; Tank trucks |
