{"id":89639,"date":"2025-07-03T11:14:56","date_gmt":"2025-07-03T04:14:56","guid":{"rendered":"https:\/\/mcbifi-bauchemie.com\/products\/mc-injekt-2088\/"},"modified":"2026-04-11T11:48:55","modified_gmt":"2026-04-11T04:48:55","slug":"mc-injekt-2088","status":"publish","type":"product","link":"https:\/\/mcbifi-bauchemie.com\/en\/products\/mc-injekt-2088\/","title":{"rendered":"MC-Injekt 2088"},"content":{"rendered":"<p><strong>PRODUCT PROPERTIES:<\/strong><\/p>\n<ul>\n<li>One-component, polyurethane-based injection foam.<\/li>\n<li>Expands when in contact with water.<\/li>\n<li>Adjustable reaction time.<\/li>\n<li>Excellent bonding also to wet crack surfaces.<\/li>\n<li>Long pot life.<\/li>\n<li>Non shrinking.<\/li>\n<li>REACH-assessed exposure scenarios: periodical inhalation, application.<\/li>\n<\/ul>\n<p><strong>AREAS OF APPLICATION:<\/strong><\/p>\n<ul>\n<li>Injection of cracks and cavities, injection against flowing water.<\/li>\n<li>Injection of tunnels and deep constructions.<\/li>\n<li>Injection on drilled piles, HDI-, sheet pile- and slotted-walls.<\/li>\n<\/ul>\n<p><strong>PRODUCT CHARACTERISTICS:<\/strong><\/p>\n<table style=\"height: 252px;\" width=\"898\">\n<tbody>\n<tr>\n<td width=\"108\"><strong>Colour<\/strong><\/td>\n<td width=\"578\">Brown<\/td>\n<\/tr>\n<tr>\n<td width=\"108\"><strong>Delivery<\/strong><\/td>\n<td width=\"578\">MC-Injekt 2088: 25 kg and 200 kg pack<\/p>\n<p>MC-Injekt 2088 CAT: 2.5 kg and 10 kg pack<\/td>\n<\/tr>\n<tr>\n<td width=\"108\"><strong>Storage<\/strong><\/td>\n<td width=\"578\">Can be stored in original sealed packs at temperatures between + 5\u00b0C and + 35\u00b0C in dry conditions for at least 18 months. The same requirements are valid for transport.<\/td>\n<\/tr>\n<tr>\n<td width=\"108\"><strong>Cleaning agent<\/strong><\/td>\n<td width=\"578\">Within the pot life all equipment may be cleaned with MC-Verd\u00fcnnung PU (MC-Thinner PU). Partially or completely cured material can only be removed mechanically. Water or water-based cleaning agents must not be used under any circumstances.<\/td>\n<\/tr>\n<tr>\n<td width=\"108\"><strong>Disposal<\/strong><\/td>\n<td width=\"578\">Packs must be emptied completely.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><strong>TECHNICAL DATA:<\/strong><\/p>\n<table style=\"height: 173px;\" width=\"900\">\n<tbody>\n<tr>\n<td width=\"210\"><strong>Characteristic<\/strong><\/td>\n<td width=\"102\"><strong>Unit<\/strong><\/td>\n<td width=\"114\"><strong>Value<\/strong><\/td>\n<td width=\"252\"><strong>Comments<\/strong><\/td>\n<\/tr>\n<tr>\n<td width=\"210\">Mixing ration<\/td>\n<td width=\"102\">p.b.w.<\/td>\n<td width=\"114\">10 : 0.033 &#8211; 10 : 1<\/td>\n<td width=\"252\">Component A : MC-Injekt 2088 CAT<\/td>\n<\/tr>\n<tr>\n<td width=\"210\">Density<\/td>\n<td width=\"102\">kg\/dm\u00b3<\/td>\n<td width=\"114\">1.15<\/td>\n<td width=\"252\">Mixture<\/td>\n<\/tr>\n<tr>\n<td width=\"210\">Viscosity<\/td>\n<td width=\"102\">mPa\u00b7s<\/td>\n<td width=\"114\">400<\/td>\n<td width=\"252\">DIN EN ISO 3219<\/td>\n<\/tr>\n<tr>\n<td width=\"210\">Application time<\/td>\n<td width=\"102\">hours<\/td>\n<td width=\"114\">6 &#8211; 8<\/td>\n<td width=\"252\"><\/td>\n<\/tr>\n<tr>\n<td width=\"210\">Application temperature<\/td>\n<td width=\"102\">\u00b0C<\/td>\n<td width=\"114\">+ 5 &#8211; + 35<\/td>\n<td width=\"252\">Air, substrate and material temperature<\/td>\n<\/tr>\n<tr>\n<td width=\"210\">Volume expansion with 5 % water without counter pressure<\/td>\n<td width=\"102\">%<\/td>\n<td width=\"114\">1.000 &#8211; 2.000<\/td>\n<td width=\"252\">At 20\u00b0C and 50 % rel. humidity<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><em>* All technical values relate to 21\u00b12 \u00b0C and 50 % relative humidity.<\/em><\/p>\n<p><strong>APPLICATION NOTES:<\/strong><\/p>\n<ul>\n<li>Preparation: Before injection the structure\u2019s voids and cracks have to be inspected according to technical standards and regulations, and an injection concept is to be planed.<\/li>\n<li>Mixing: MC-Injekt 2088 consists of a one component injection resin, which is adjusted with the catalyst MC-Injekt 2088 CAT to the required reaction time.<\/li>\n<\/ul>\n<table style=\"height: 171px;\" width=\"437\">\n<tbody>\n<tr>\n<td width=\"151\"><strong>Catalyst quantity<\/strong><\/td>\n<td width=\"125\"><strong>Reaction time (min.)<\/strong><\/td>\n<\/tr>\n<tr>\n<td width=\"151\">0.33 %<\/td>\n<td width=\"125\">50<\/td>\n<\/tr>\n<tr>\n<td width=\"151\">1.67 %<\/td>\n<td width=\"125\">11<\/td>\n<\/tr>\n<tr>\n<td width=\"151\">3.33 %<\/td>\n<td width=\"125\">6<\/td>\n<\/tr>\n<tr>\n<td width=\"151\">5.00 %<\/td>\n<td width=\"125\">5<\/td>\n<\/tr>\n<tr>\n<td width=\"151\">6.67 %<\/td>\n<td width=\"125\">4<\/td>\n<\/tr>\n<tr>\n<td width=\"151\">10.00 %<\/td>\n<td width=\"125\">3.5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<ul>\n<li>Reaction time depends on concentration of the catalyst (at 23 \u00b0C and 75 % rel. humidity).<\/li>\n<li>The pot life of the mixed components is about 6 &#8211; 8 hours provided that there is no contact with water and atmospheric humidity.<\/li>\n<li>If a skin forms on the top of the mixed material due to humidity, the liquid material underneath the skin can still be used.<\/li>\n<li>Injection:<br \/>\n&#8211; The injection can be executed with the injection pump MC-I 510 (1-component pump).<br \/>\n&#8211; Injection with MC-Injekt 2088 should be effected in intervals depending on site conditions to allow the foam enough time to react. Within a few minutes further injection requirements can be determined from the visible water penetration developed from the injection pressure.<br \/>\n&#8211; MC-Injekt 2300 top \/ 2300 rapid or MC-Injekt 2300 NV must follow to permanently seal the crack.<br \/>\n&#8211; Work with MC-Injekt 2088 must be stopped at temperatures below + 5\u00b0C.<\/li>\n<li>Machine Cleaning: Within the pot life all equipment may be cleaned with MC-Verd\u00fcnnung PU (MC-Thinner PU). Partially or completely cured material can only be removed mechanically.<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p><strong>Foaming injection resin<\/strong> <strong>for temporary sealing measures<\/strong><strong>.<\/strong><\/p>\n","protected":false},"featured_media":80916,"template":"","meta":[],"product_cat":[533,532],"product_tag":[841],"acf":[],"_links":{"self":[{"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/product\/89639"}],"collection":[{"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/types\/product"}],"version-history":[{"count":6,"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/product\/89639\/revisions"}],"predecessor-version":[{"id":91450,"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/product\/89639\/revisions\/91450"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/media\/80916"}],"wp:attachment":[{"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/media?parent=89639"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/product_cat?post=89639"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/mcbifi-bauchemie.com\/en\/wp-json\/wp\/v2\/product_tag?post=89639"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}